Jump to content
SubSpace Forum Network

Recommended Posts

Posted

There seem to be a slight problem with my S2C Packetloss, its ALWAYS at a steady 0.6.

 

a little background

At first my ISP were offering 1mbps down and 400kpbs up, (still had the 0.6 s2c), when they upgraded to 8mbps down and 1mbps up i had to get a new modem, but is still having the s2c issues. this is in EVERY ssc zone. Even when the sscu redstar server was in sweden i was having 10 ms low, 20 avg, 30 high and 0.6 s2c.

 

My C2S ploss is always 0.0

 

im connecting through a d-link 604 router, but even without it i still get the 0.6 ploss.

Other people in my area havent tested continuum so i cant verify if they have the same problem, but i do know one guy that lives about 1km away got 0.1 s2c and 0.0 c2s. (yes, he is using the same ISP)

 

i have also been trying on different comps, but still have the 0.6 ploss.

So any tips on how to fix this?

 

Here is a traceroute

Tracing Zone: SSCU RedStar IP Address: 69.56.238.242

 

Hop IP Address Host Name Loss(%) Min/Avg/Max Ping

--- --------------- -------------------------------- ------- ----------------

1 192.168.0.1 g1-r4-hemma.hemma.local 0.0 0 0 0

2 81.224.84.1 gw-n1fls27o1061.bredband.comhem. 0.0 0 10 20

3 81.225.146.61 ld-c-d1-geth8-1.se.telia.net 0.0 0 10 60

4 81.228.72.136 m-b-c1-link.se.telia.net 0.0 0 10 40

5 213.248.101.149 kbn-b1-pos13-0.telia.net 0.0 10 10 20

6 213.248.65.17 kbn-bb2-pos0-2-0.telia.net 0.0 0 10 30

7 213.248.65.30 s-bb2-pos7-0-0.telia.net 0.0 10 20 40

8 213.248.66.10 s-b3-pos4-0.telia.net 0.0 10 20 30

9 213.248.101.38 global-crossing-02012-s-b3.telia 0.0 20 20 30

10 67.17.73.34 so1-0-0-2488m.ar1.dal2.gblx.net 0.0 150 160 180

11 64.213.176.150 The-Planet.ge-0-2-1.ar1.DAL2.gbl 0.0 150 150 180

12 12.96.160.19 car2-3-v1.dllstx2.theplanet.com 0.0 150 160 230

13 69.56.238.242 69-56-238-242.theplanet.com 0.0 150 150 160

 

Cycles: 29

Posted

Yer i get the same problem although my set up isnt as fancy as urs

i got 1mb dsl and ive had no lag trouble for ages since i changed from 56k to it

but suddenly for some reason i get probs including my PL at 0.6% and c2s

usually below 0.1%, wtf is going on? this isnt just in ssc zones in other zones my

PL is always at 0.2%

Posted

turn off stuff in the background... installing apps that run in the background can steal your bandwidth and cause small ploss like this. All of that aside.... 0.6% is NOTHING. You lose an average of 6 out of 1000 packets. Could be server game data, could be position data, could be checksums, could be weapons... but its minimal. The only time you really start noticing ploss is when it gets above 3 and 4 percent.

 

I play on a wireless laptop with 2.5% s2c and I don't care.

Posted

do you think i dont close all programs?

ive closed firewall, antivirus, turned off

stretched wallpaper, i only find this weird

because ive rarely had PL past 0.1% and

not had it for every zone i enter.....

the thing with mine is it really does show

not just small position jumps full weapons lag

i fire a bomb and it goes thru ppl

i fire a gun and it dissappears straight away

agh its bad

-DJ muppetmaster-

Posted

you dont really need to worry untill the packetloss reaches 2%.

 

Ad barge said shut down any other internet programs if your worried about it buy .6 is nothing to worry about and it will go away soon enough anyway.

Posted

but...... why .6 ? why is it always at .6? 2 ppl with the same problem... why not .7 or .5? ... OMG.. IT'S ... IT'S... TEH ALIEENNHZZZ!!! :syrus: IT'S THEM!! GO H1DE URSELF! FAST! :D :ph34r: :ph34r: :ph34r:

 

 

 

:jules: :jules: :jules: :jules: :jules:

Posted
the thing with mine is it really does show

not just small position jumps full weapons lag

i fire a bomb and it goes thru ppl

i fire a gun and it dissappears straight away

this cannot happen... and it definately can't be blamed on ploss.

 

The game client will always make bombs and bullets hit the enemy on your screen locally, because it doesn't have time to send it to the server then receive the response back from the server, then display that response on your screen.

You can never see what the other person sees, so you will never really know whether your bullets/bombs hit.

 

No offense, but what you describe simply cannot happen... You are exaggerating quite a bit.

Posted
maybe im exaggerating but PL with me is bad on my other comps its fine but on this one is like the demon of p; but im not exaggerating about bombs going thru ppl and bombs going thru me...... and when i mean disappear straight away, i mean it disappears after the screen goes to next image, i do know u know i wudnt be writing in tech support if i didnt know otherwise....
Posted

There is a point at which your knowledge of the game is exceeded by others. You have hit this point here with me. Either I am unable to properly describe how the architecture of this game works, or you are unable to understand my description.

 

Regardless, for over 7 years I've seen people SWEAR they got hit with a 600 damage bullet in alpha. The max damage is 400, therefore there is another explanation. The same is true here. You swear something is happening, but you are unable to determine it yet. Grasping at reasons and !@#$%^&*igning them as the problem does not help, nor will we learn from it.

 

And BTW.. a cloaker sitting in front of or on top of you WILL cause a bullet to "disappear as soon as you shoot it."

Posted
Then lets BOTH keep it calm and try to figure it out. Certain things need to be done in a certain order, so when ppl suggest a solution, sometimes you might want to try it a second or third time, rather than just skipping it. We are here to help, and you simply aren't taking it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...